Mechanical Installation

Mounting Bolt Installation for Cabinet Freestanding Models (UFPV) with Water Saving System

Refer to the Installation/Maintenance manual (P/N F232059) for mounting bolt installation information for UFPV models.

Mounting Bolt Installation for Pocket Hardmount Models (UWPV) with Water Saving System

NOTE: The WSS frame must be permanently attached to the floor.

All UWPV machines use 5/16-18 x 6" bolts for mounting the tank frame. Use the mounting bolt layouts in Figure 2.

The threaded end of the bolts should extend 2 inches above the surface of the floor.

Installation

Refer to Figure 1 for a typical installation of individual mounting bolts for the water saving frame.

1

3

 

2

Q028I

15/16" (8 mm)

26" (52 mm)

3Frame

Figure 1

F232122

9