Operating Instructions

WARNING

To reduce the risk of fire:

•DO NOT DRY articles containing foam rubber or similarly textured rubberlike materials.

•DO NOT DRY plastics, anything containing wax or chemicals such as mops and cleaning cloths, or anything dry-cleaned at home with a dry-cleaning solvent.

•DO NOT TUMBLE fiberglass curtains and draperies unless the label says it can be done. If they are dried, wipe out the cylinder with a damp cloth to remove particles of fiberglass.

W076

To reduce the risk of serious injury, open tumbler door and allow cylinder to stop before cleaning lint screen. Do not operate without lint panel in place.

W077

Step 1: Clean Lint Screen/

Compartment

Remove any accumulated lint from the lint screen and compartment. Close panel tightly against tumbler frame and lock panel securely.

CAUTION

Clean lint screen and lint compartment daily. Failure to clean the lint screen daily will result in higher than normal temperatures that may damage laundry.

W331

WARNING

To reduce the risk of serious injury, open tumbler door and allow cylinder to stop before cleaning lint screen. Do not operate without lint panel in place.

W077

Step 2: Load Laundry

Open tumbler door and load cylinder with laundry. DO NOT OVERLOAD.

NOTE: Overloading causes slow drying and wrinkling.

Close cylinder door. Tumbler will not operate with the door open.

Step 3: Determine Required Temperature

The type of fabric being dried will determine the setting. Consult the fabric-care label or fabric manufacturer to determine proper temperature setting.

IMPORTANT: ALWAYS FOLLOW THE FABRIC CARE INSTRUCTIONS SUPPLIED BY THE GARMENT MANUFACTURER.

Step 4: Determine Control Type

Refer to the following pages and use the appropriate instructions for the control type.

Stacked Tumblers Only: Use the correct coin slot and control panel for the top or bottom cylinder.

M414462

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

11