Alliance Laundry Systems T453I 24

Programming the Electronic OPL Control

Time Dry and No Heat Modes

After fabric selection, press the TIME pad. Refer to Figure 14.

TIME

	COOL
	DOWN
MORE	LESS
+	--

T397I

TIME DRY PADS

T397I

Figure 14

Apreset drying time, “Td:**” will replace “A0:00” in the display. This time can be changed by pressing the MORE or LESS pads. For 1 minute changes, press pad and release. For 5 minute changes, press pad and hold. Maximum drying time allowed is 60 minutes. Refer to Table 3 for Preset Drying Times.

Cycles	Preset Time	Range

HIGH	35 Min.	1 – 60 Min.

MEDIUM	20 Min.	1 – 60 Min.

MED LOW	15 Min.	1 – 60 Min.

LOW	30 Min.	1 – 60 Min.

NO HEAT	20 Min.	1 – 60 Min.

Table 3

“AC:**” will be displayed when tumbler is in Auto Cool Down. Typical cool down times for fabric selections are preset as shown in Table 3. The cool down time can only be altered before cycle is started. To alter cool down time press the COOL DOWN pad and then press the MORE or LESS pad (when cool down time is altered, “TC:**” will be displayed). For 1 minute changes, press pad and release. For 5 minute changes, press pad and hold. Cooling time can be from 1 to 39 minutes. To return to the Auto Cool Down, press MORE or LESS pad until “AC:**” is displayed.

To start the cycle, press START. The total drying time plus cool down time will display. During the cycle, remaining time displays.

NO HEAT is a time dry cycle only. When NO HEAT is pressed, a 20 minute preset time will display. This can be changed from 1 minute to 60 minutes by pressing the MORE or LESS pads before pressing START. The COOL DOWN pad does not work in NO HEAT cycles.

M414462