Alliance Laundry Systems T453I manual 25

Custom

Frequently used cycles can be saved in the control’s memory as Custom cycles. Only one cycle can be saved for each fabric type.

Create an Automatic, Time Dry, Special, or Special Time cycle and save them by pressing the word CUSTOM before pressing START. To change a Custom cycle, repeat above.

To recall and use a Custom cycle, press its ON/SELECT pad twice. Press START.

Programming the Electronic OPL Control

During Custom cycles the display is the same as non- Custom Automatic cycles. The CUSTOM status light will be on.

When creating or changing a Custom cycle, record it on a Custom Cycle Record, refer to sample at bottom of page. To modify or fine-tune a Custom cycle, its values must be known. Custom cycle values can be extracted from the micro-control, but it is easier and more permanent to use a Custom Cycle Record.

Custom Cycle Record

Select	Automatic			Time		Temp	Load Type
	Dryness Level	Cool Down	Dry		Cool Down
HIGH
MED
MED LOW
LOW
NO HEAT
Select	Special		Special Time			Temp	Load Type
	Dryness Level	Cool Down	Dry		Cool Down
HIGH
MED
MED LOW
LOW
NO HEAT

M414462 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 23