
| Operating Instructions |
|
|
TEMPERATURE SELECTOR | SINGLE AND DUAL COIN |
METER COIN SLOT AND KNOB |
PUSH TO START
BUTTON
TEMPERATURE
HIGHLOW
PUSH
TO
START
INSERT QUARTER
TURN KNOB
Q |
| 25 |
| R |
U | A |
| E | |
| S |
| ||
|
| RTERMA | T |
|
|
|
|
| |
1 |
| 2 |
| 3 |
SELECT |
| INSERT |
| PUSH |
TEMP |
| COIN |
| START |
T366I
Figure 3
1.Set the TEMPERATURE selector at HIGH or LOW, or anywhere between these settings.
2.Coin Drop Models: Insert the coin(s) in the coin slot, turn the knob to the right and release it. Coin Slide Models: Insert the required number of coins in the coin slide. Push coin slide in completely and then release it.
3.Press the PUSH TO START button and hold it for approximately three (3) seconds.
IMPORTANT: If the cylinder door is opened during the cycle, the heating system will shut off and the motor will stop. However, the timer will continue to run. To restart the cycle, the door must be closed and the PUSH TO START button must be pressed in.
WARNING
To reduce the risk of bodily injury, the tumbler stops tumbling when the door is opened. Do not use the tumbler if it does not stop tumbling when the door is opened or starts tumbling without pressing the START pad. Remove the tumbler from use and call for service.
W078
4.When the cycle is complete, open door and remove the laundry.
M414462 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 13 |