Alliance Laundry Systems T453I 20

Operating Instructions

Reversing Operation

Tumblers with the reversing options are equipped with a second motor and additional controls to reverse the direction of the cylinder rotation. This prevents the tangling of large pieces and minimizes wrinkling.

Reverse Control Switch

A simple “on-off” switch is placed in the control panel area so the operator can select the reversing or non- reversing operation. The switch is wired into the reverse control time circuit so the cylinder will always turn clockwise (as viewed from the front of the dryer) when the reverse control switch is actuated for “non- reversing” operation. If the cylinder is turning in the wrong direction when the switch is actuated, it will continue for a few seconds and then start up in the proper direction.

IMPORTANT: After any electrical maintenance is done, make sure that the blower motor is turning clockwise as viewed from the front of the 0350S, 50, and 75 pound tumblers and counterclockwise on the 634, 120 and 170 pound tumblers. Then set the reverse control switch to “non-reversing” and note that the cylinder turns constantly clockwise as viewed from the front of the tumbler. If not, interchange L1 and L2 power leads to the reverse drive motor.

M414462