Alliance Laundry Systems T453I 23

Automatic Dry and Condition Mode

When a temperature is selected, “A0:00” will appear in the display window. Press START to start the tumbler. “A*:**” will appear in the display window. The first “*” is the selected dryness level (dryness levels less than zero will appear as “-*”), and the “:**” is the elapsed time.

The degree of dryness can be altered. Use the MORE pad, or the LESS pad, to increase or decrease dryness level.

NOTE: Dryness level can only be altered prior to the end of the first heat cycle.

ON / SELECT

HIGHSTART

MEDIUMSTOP/RESET

MED LOW

LOW

NO HEAT

T399I

ON/SELECT PADS

T399I

Figure 12

When clothes reach selected dryness level, Cool Down begins. “AC:**” will appear in the display window. “:**” is the elapsed Cool Down time. When Cool Down ends, tumbler automatically goes into wrinkle- free and “Lr” (Load Ready) will appear in the display.

Programming the Electronic OPL Control

“AC:**” will be displayed when tumbler is in Auto Cool Down. Typical cool down times for fabric selections are preset as shown in Table 2. The cool down time can only be altered before cycle is started. To alter cool down time press the COOL DOWN pad and then press the MORE or LESS pad (when cool down time is altered, “TC:**” will be displayed). For 1 minute changes, press pad and release. For 5 minute changes, press pad and hold. Cooling time can be from 1 to 39 minutes. To return to the Auto Cool Down, press MORE or LESS pad until “AC:**” is displayed.

TEMP
MORE	LESS
+	--
CONDITION

T396I

DRYNESS PADS

T396I

Figure 13

Use the CONDITION pad for items to be left damp for ironing. “Cn:00” will replace “A0:00” in the display.

Automatic Cool Down ends when either a preset temperature or a preset time is reached. Refer to Table 2.

AUTOMATIC COOL DOWN

TEMPERATURES AND TIMES

Fabric	Preset	Preset Time
Fabric	Temperature	Preset Time
	Temperature

HIGH	100°F, 38°C	5 Minutes

MEDIUM	90°F, 32°C	8 Minutes

MED LOW	90°F, 32°C	5 Minutes

LOW	90°F, 32°C	5 Minutes

Table 2

M414462