Alliance Laundry Systems T453I Maintenance

Maintenance

WARNING

To reduce the risk of electric shock, fire, explosion, serious injury or death:

•Disconnect electric power to the tumbler before servicing.

•Close gas shut-off valve to gas tumbler before servicing.

•Close steam valve to steam tumbler before servicing.

•Never start the tumbler with any guards/panels removed.

•Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the tumbler is properly grounded.

W002

Daily

Keep tumbler area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.

Lint Removal

WARNING

To reduce the risk of serious injury, do not open the lint panel while the tumbler is in operation. Open tumbler door and allow cylinder to completely stop before cleaning lint screen.

	W079			T388I

1.	Open the lint panel or pull out lint drawer.


			1
2.	Remove all accumulated lint in the lint		0220S, 0270S, & 0350S MODELS
	compartment area. Lightly brush any lint that			T388I
	may be left on the lint screen. Lint left in the lint			T388I
	may be left on the lint screen. Lint left in the lint	1	Lint Screen
	compartment is drawn back onto the lint screen	1	Lint Screen
	and will restrict proper air circulation.

3.Be sure the lint screen is not torn. If it is, replace immediately. A torn lint screen allows lint to pass from the tumbler to the ductwork system, thus creating a restriction to air circulation.

4.The lint screen is designed to completely cover the entire opening in the lint screen panel. Be sure that it does so. Excessive gaps between the lint screen and the lint screen panel allows lint to pass into the ductwork system.

5.50-170 Pound Tumblers: Wipe any accumulated lint off of the thermostat sensing probe, cabinet hi-limit thermostat or thermistor. Failure to do so will allow a buildup of lint in this area to act as an insulator, causing the tumbler to overheat.

6.Replace the lint compartment access panel on the tumbler, ensuring a tight fit and lock.

Figure 15

0300D MODELS

TMB98N

Figure 16

M414462