Chapter 2: Installing the Switch
3.Position the transceiver with the label facing up.
4.Slide the transceiver into the slot until it clicks into place.
Figure 22. Installing an SFP Transceiver
5.Verify that the handle on the SFP transceiver is in the upright position, as shown in Figure 23, to prevent inadvertently removing the transceiver.
SFP Handle |
Figure 23. Positioning the SFP Handle in the Upright Position
6.Repeat this procedure to install another SFP transceiver or go to “Cabling the Twisted Pair or Fiber Optic Ports” on page 61.
For SFP optical and cabling specifications, consult the documentation shipped with the module.
58
