Allied Telesis AT-9408LC/SP, AT-9424T/POE manual System Fault LED is Steadily On

AT-9400 Series Gigabit Ethernet Switches Installation Guide

System Fault LED is Steadily On

If the system FAULT LED is steadily on, a problem has occurred in the switch. Do the following:

ˆTry resetting the switch by disconnecting and reconnecting the AC power cord.

ˆIf the FAULT LED remains ON, try downloading a new version of the switch’s management software. For instructions, refer to the AT-S63 Management Software User Guides.

Note

If the FAULT LED remains steadily on, contact Allied Telesis

Technical Support for assistance.

73