Adjusting Volume/Subwoofer/
Bass/Treble/Balance (Between Left
and Right)/Fader (Between Front
and Rear)
1 Press the MODE (Audio Control) knob repeatedly to choose the desired mode.
Each press changes the modes as follows:
|
|
| * | * * |
| * * | |
| VOLUME |
| |||||
|
| ||||||
|
| FADER |
| BALANCE |
|
| |
|
|
|
|
| |||
2 Rotate the MODE (Audio Control) knob until the desired sound is obtained in each mode.
Audio Mute Function
Activating this function will instantly lower the volume level by
20dB.
1Press the MUTE button to activate the MUTE mode. The audio level will decrease by about 20 dB.
Pressing the MUTE button again will bring the audio back to its previous level.
•* Not displayed when setting the
•** To display the BASS or
TREBLE mode:
1 Press and hold the SETUP button for at least 3 seconds.
2Press the 
DN or
UP
button to select the BASS/ TRE mode.
3Press the TUNE button to set
the BASS/TRE to ON.
4Press the SETUP button to complete the setting. Then perform the step 1 in the left
column.
**“BASS”, “TREBLE” is not displayed when an external audio processor is connected (except
•If the MODE (Audio Control) knob is not rotated in 5 seconds after selecting the
BASS, TREBLE, BAL- ANCE, or FADER mode, the unit automatically returns to the VOLUME mode.
•When the subwoofer mode is ON, its respective levels may be adjusted.
•The settings of the Bass and Treble will be individually memorized for each source (FM, AM and CD) until the setting is changed. Depending on the connected devices, some functions and display indications do not work.
