installation
r e s t r a i n t requirements - mobile equipment
The fryer must be supplied with a connector that complies with all state and local installation codes.
Any appliance that is not furnished with a power supply cord but that includes a set of casters must be tethered. Adequate means must be provided to limit the movement of this appliance without depending on or transmitting stress to the electrical conduit. The following requirements apply:
1.Casters must be a maximum height of
2.Such mobile appliances must be installed with the use of a flexible connector secured to the building structure.
A mounting connector for a restraining device is located on the upper back flange of the appliance
chassis, approximately 31" (787mm) from the floor. A flexible connector is not supplied by nor is it
available from the factory.
WARNING
RISK OF ELECTRIC SHOCK.
Appliance must be secured
to building structure.