Amana XRSS267BW Fresh Food Features, Door Storage, Dairy Center, Grip Pads, Door Buckets

Fresh Food Features

Door Storage

Dairy Center

The dairy center provides convenient storage for items such as butter, yogurt, cheese, etc. This compartment is an adjustable feature located in the door. It can be moved to several different locations to accommodate storage needs.

• To remove, slide dairy center up and pull straight out.

•To install, reverse above procedure.

Tilt-Out Door Buckets (some models)

The Tilt-Out Bucket assembly consists of a bucket and frame, providing adjustable, convenient storage for food items in door. The bucket assembly tilts forward for easy access of items, and lifts out for ease in cleaning and adjusting.

To remove and install bucket:

•To remove bucket, tip bucket

forward and pull straight out to remove.

•To install bucket, slide bucket

into bucket frame and push bucket upright.

To adjust bucket frame:

•Remove bucket per above instructions.

•Lift frame off door support and place in desired door location.

Grip Pads

The Grip Pads prevent objects from sliding in the door bucket. Grip Pads are removable and are top-rack dishwasher safe for easy cleaning.

Beverage Chiller™/ Mini-Chiller™ (some models)

The Temperature-Controlled Beverage Chiller™ and Temperature-Controlled Mini Beverage Chiller™ keep beverages and other items up to 3°C colder than the rest of the fresh food section. Air inlet allows air from the freezer section to pass to Beverage Chiller™.

The Beverage Chiller™ control is located on the left wall of fresh food section. Control adjusts amount of air circulating in Beverage Chiller™. Turn control toward the large snowflake icon for colder temperature.

To remove and install Beverage Chiller™:

•If located directly above Chiller,

dairy center or door bucket may need to be removed. Refer to appropriate instructions and remove item. Slide Beverage Chiller™ assembly up and pull straight out.

• To install, align one of the
Beverage Chiller™ cold air
intake holes (A) with one of		B
the two air inlets (B) in door
	A
liner. Push assembly down
onto door liner retainer until
it stops.

IMPORTANT: Beverage Chiller™ will not operate properly if air intake holes are not aligned with air inlet in door liner.

Door Buckets

Door buckets adjust to meet individual storage needs.

•To remove, slide bucket up and pull straight out.

•To install, reverse above procedure.

10