AMCC PN 720-0104-00 manual Other Controller Settings

3DM 2 Reference

Note: The policy Continue on Source Error During Rebuild is equivalent to the “Force continue on source errors” option in 3DM v 1.x and the “ignoreEcc” option in the CLI.

Other Controller Settings

For 9000-series controllers, the Other Controller settings displays information about additional settings that can only be changed in the BIOS (3BM). For more information see “Setting Policies for a Controller through 3BM” on page 74.

This section does not appear for 7000- and 8000- series controllers.

Number of Drives Per Spin-up.Number of drives that will spin up at the same time when the controller is powered up. (This setting only applies when the feature is supported by the disk drives and has been enabled in 3BM.)

Delay between Spin-ups.The delay between drive groups that spin up at one time on this particular controller.

Export JBOD (Unconfigured) Disks. Indicates whether unconfigured disks (JBODs) should be exported to the operating system. By default, this setting is disabled. For more information about this feature, see “Exporting JBOD Disks” on page 75.

Disable Write Cache on Unit Degrade. Indicates whether write cache will be automatically disabled on a unit if it becomes degraded. After the unit is rebuilt, the write cache will be re-enabled automatically.

www.3ware.com 55