Recording Techniques (Cont.)
Emergency Recording
The VCR automatically starts an alarm recording when an alarm signal is input even if the VCR is in stop mode, turned off or in
Series Recording 2
Series Recording 2 provides a function: when the first VCR’s tape reaches its end, the second VCR automatically begins recording. When the tape in second VCR finishes, the first VCR starts recording again. (The two VCRs keep recording one after another.) Setup both 1st and 2nd VCRs as in the steps below.
1. Repeat step 1 to 6 of Series Recording 1.
1.After step 6 of Alarm Recording, turn JOG to select EMERGENCY REC and turn SHUTTLE to the right.
2.Turn JOG to select ON and turn SHUTTLE to the right.
•The Emergency Recording
indicator (
) illuminates on the fluorescent display.
<RECORDING SET UP> | L30H |
ALARM REC MODE | |
ALARM REC DURATION | 10M |
EMERGENCY REC | ON |
SUPER RESOLUTION | ON |
ONE SHOT•FIELD | 1 |
ONE SHOT•INTERVAL | SHOT |
Steps 3 to 6 must be set to both 1st and 2nd VCRs.
2. Turn SHUTTLE to the left. | <MAIN MENU> |
|
• <MAIN MENU>appears. | DISPLAY |
|
TIMER PROGRAM |
| |
| RECORDING SET UP |
|
| REAR TERMINAL |
|
| MAINTENANCE |
|
| CLOCK/FIRST TIME SET UP | |
3. Turn JOG to select CLOCK/FIRST | <FIRST TIME SET UP> |
|
TIME SET UP and turn SHUTTLE to | TIME DATE ADJUST | STOP |
TAPE END | ||
the right. | QUASI | ON |
VIDEO MODE | AUTO | |
• <FIRST TIME SET UP> menu | TAPE LENGTH | |
|
| |
Display during alarm recording
•During the alarm recording, the alarm recording counter will automatically be displayed on screen if DISPLAY MODE
(
page 30) is set to 1, 2 or 3.
•The Alarm Recording indicator (
) on the fluorescent display flashes during alarm recording and stays on when the alarm recording is finished.
•The alarm recording counter shows up to 9999 alarm recordings, then it is reset to 0000 and continues counting.
•When initializing the alarm recording list, the alarm recording counter will also be reset.
Alarm recording counter
| appears. |
|
|
4. | Turn JOG to select TAPE END and | <FIRST TIME SET UP> |
|
| turn SHUTTLE to the right. | TIME DATE ADJUST | STOP |
| TAPE END | ||
|
| QUASI | ON |
|
| VIDEO MODE | AUTO |
5. Turn JOG to select REWIND and turn | TAPE LENGTH | ||
|
| ||
| SHUTTLE to the right. | <FIRST TIME SET UP> |
|
| TIME DATE ADJUST | REWIND | |
|
| TAPE END | |
|
| QUASI | ON |
6. | Press MENU button. | VIDEO MODE | AUTO |
TAPE LENGTH | |||
|
| ||
•The day and present time display appears on screen.
page 27 for series recording connection
Note
•Timer or emergency recording function cannot be used with series recording at the same time.
Series Recording 1
Series recording is possible if two or more of these units are connected. When the first VCR’s tape reaches its end or an error occurs on VCR, the second VCR automatically begins recording.
1.Press MENU button.
•<MAIN MENU>appears.
2.Turn JOG to select REAR TERMINAL and turn SHUTTLE to the right.
•<REAR TERMINAL> menu appears.
Step 3 and 4 on 1st VCR only:
3.When the cursor (
) is next to CALL OUT, turn SHUTTLE to the right.
4.Turn JOG to select WRNG•TAPE END and turn SHUTTLE to the right.
<MAIN MENU>
DISPLAY
TIMER PROGRAM RECORDING SET UP REAR TERMINAL MAINTENANCE
<REAR TERMINAL>
CALL OUT | WRNG |
CLOCK OUT | REC- 1 |
MODE OUT | REC |
REC IN |
<REAR TERMINAL>
CALL OUT | WRNG |
CLOCK OUT | REC- 1 |
MODE OUT | REC |
REC IN | |
<REAR TERMINAL> | |
CALL OUT | WRNG•TAPE END |
CLOCK OUT | REC- 1 |
MODE OUT | REC |
REC IN | |
Step 5 and 6 on 2nd VCR only:
5.Turn JOG to select REC IN and turn SHUTTLE to the right.
6.Turn JOG to select SERIES and turn SHUTTLE to the right.
<REAR TERMINAL>
CALL OUT | WRNG |
CLOCK OUT | REC- 1 |
MODE OUT | REC |
REC IN | |
<REAR TERMINAL> | |
CALL OUT | WRNG |
CLOCK OUT | REC- 1 |
MODE OUT | REC |
REC IN | SERIES |
7.Press MENU button.
•The day and present time display appears on screen.
12 Advanced Functions
Note A point to notice | Info. Supplementary information |
