Controls and Functions (Cont.)
Fluorescent Display
(Counter Memory Stop/Month) indicator
Illuminates during the counter memory stop.
Also, illuminates when the month (of time and date) is being entered via the front panel.
(Power Loss) indicator
Illuminates when the VCR is turned on after a power failure occurs during recording.
(Alarm Recording) indicator
Flashes during alarm recording and stays on when the alarm recording is finished.
(Time Date Search/Day) indicator
Illuminates during the time date search.
Also, illuminates when the day (of time and date) is being entered via the front panel.
(Index Search) indicator
Flashes when recording an index signal and illuminates during the index number setup and the index search. (Index number is shown on the Recording and Playback Mode display.)
(Skip Search) indicator
Illuminates during the skip search.
(Daylight Saving Time) indicator
Illuminates when “DAYLIGHT SAVINGS” is set to “ON”.
, 
(Tape Speed) indicator
Indicates the tape speed.
SP is standard play; EP is extended play.
(Super Resolution) indicator
Illuminates during the recording, during the playback using a tape recorded in Super Resolution mode and when a tape recorded in Super Resolution mode is inserted to the VCR, providing “SUPER RESOLUTION” in “RECORDING SET UP” menu is set to “ON”.
(Repeat) indicator
Illuminates when “TAPE END” in “FIRST TIME SET UP” menu is set to “REPEAT” or “ALARM•PROT”.
(Cassette Status) indicator
Illuminates when a tape is inserted.
(Timer Recording) indicator
Illuminates when the VCR is in
(Tape Remaining) indicator
Indicates the position on the tape. S indicates the Start of the tape and E indicates the End of the tape.
Counter/Clock display
While the VCR is turned on, indicates the relative position on the tape. (The Counter stops counting where no recording is made on the tape.) When it is off, (when set) the clock (24- hour format) is shown.
Recording and Playback Mode/Index Number display
Displays the number corresponding to a selected recording or playback mode. The mode shown here varies by the “TAPE LENGTH” setting
(Emergency Recording) indicator
Illuminates when “EMERGENCY REC” in “RECORDING SET UP” menu is set to “ON”.
Lock/Lock All indicator
: illuminates when all buttons (except REC button and EJECT button) are locked.
: illuminates when all buttons are locked.
(Playback) indicator
Illuminates during playback.
(Recording) indicator
Illuminates during recording.
4 Introduction
Note A point to notice | Info. Supplementary information |
