: Recording starts when the REC IN terminal is grounded.

Setting the super resolution (SUPER RESOLUTION)

ON : Recording/playback is made at over 400 lines of resolution.

OFF : Recording/playback is made at VHS mode.

Setting the number of fields in oneshot recording (ONE

SHOT•FIELD)

Sets the number of recorded fields in the oneshot recording mode. When JOG is turned, the display will be switched in the order of 1 2 3 4 5 10 20 30 1 ...

Setting the interval time in the oneshot recording (ONE

SHOT•INTERVAL)

Sets the interval time in the oneshot recording mode. When JOG is turned, the display will be switched in the order of SHOT 10S (second) 15S 30S 45S 1M (minute) 2M 3M SHOT ...

REAR TERMINAL

CLOCK ADJ : When the clock indicates “00(min.):00(s)”. (The signal is output for 1 second only.)

Setting the operation mode of REC IN terminal (REC IN)

SERIES

REC-START/STOP : Recording continues while the REC IN terminal is grounded. If the signal is input for a short period, the VCR may not start recording.

SYNC REC : The video signal from the multiple of 3 or 5 cameras can be recorded separately by

connecting a switcher ( page 14 for the menu setting and page 27 for the connection).

MAINTENANCE

Displaying the power loss list

<MAINTENANCE>

Setting the operation mode of the CALL OUT terminal (CALL OUT)

Sets the mode of call signal output from the CALL OUT terminal. If any abnormalities occur with the VCR during recording, the call signal is

<REAR TERMINAL>

CALL OUT

WRNG•TAPE END

CLOCK OUT

REC- 1

MODE OUT

REC

REC IN

SERIES

(POWER LOSS LIST)

page 15

Displaying the alarm list (ALARM LIST)

page 15

POWER LOSS LIST ALARM LIST

ALL MENU INITIALIZE POWER LOSS LIST CLEAR ALARM LIST CLEAR

<REPEAT REC TIMES>

0

<ELAPSED TIME>

0H

output from the CALL OUT terminal on the rear panel regardless of CALL OUT setting.

Initializing all menu settings (ALL MENU INITIALIZE) All menus will be initialized except timer programs.

1. Press MENU button.

<MAIN MENU> appears.

WRNG•TAPE END : The VCR outputs a call signal when the tape reaches its end during recording or when a malfunction occurs during recording. The VCR’s function when the tape ends depends on the setting of TAPE END in FIRST TIME SET UP menu ( next column).

WRNG•REMAIN : The VCR outputs a call signal when a

 

malfunction occurs during recording or

 

when the tape has approximately 9

 

minutes (at 6H mode) left during recording.

WRNG

: The VCR outputs a call signal only when a

 

malfunction occurs during recording.

Setting the recording mode and frequency division ratio (CLOCK OUT)

Sets the recording mode and the frequency division ratio of clock pulse output from the CLOCK OUT terminal.

Setting the recording mode during the clock pulse output

REC : When recording in any mode.

T/L REC : When recording in time-lapse mode (L18H-128H or 0H).

Setting the frequency division ratio of the clock pulse output.

When JOG is turned, the display will be switched in the order of 1 2 3 4 5 10 15 20 25 30 50 60 F (field) 1 ...

The numbers 1 to 60 indicate the number of frames at 6H recording mode and the number of fields at time lapse recording modes. (One frame consists of two fields.) When set to F (field), one field is selected.

Setting the operation mode of the MODE OUT terminal (MODE OUT)

A mode signal is output under the following circumstances.

REC

: During recording.

PLAY

: During playback.

POWER

: While the VCR is turned on.

TAPE IN

: When a tape is inserted in the VCR.

TAPE REMAIN : When the tape has approximately 9 minutes (at 6H mode) left.

Reference page

2. Turn JOG to select MAINTENANCE and turn SHUTTLE to

the right.

<MAINTENANCE> menu appears.

3. Turn JOG to select ALL MENU

ALL MENU INITIALIZE

INITIALIZE and turn SHUTTLE to

Turn the SHUTTLE RING

the right.

then all MENU will be

initialized.

<ALL MENU INITIALIZE> menu appears.

4.Turn SHUTTLE to the left.

The setting of all menus (except TIMER PROGRAM) will return to its initial setting.

5.Press MENU button.

The day and present time display appears on screen.

Clearing the power loss list (POWER LOSS LIST CLEAR) page 15

Clearing the alarm list (ALARM LIST CLEAR)

page 15

Displaying number of tape use (REPEAT REC TIMES)

page 16

Displaying the elapsed time of VCR (ELAPSED TIME)

page 16

Installation 31

Page 35
Image 35
American Dynamics ADV096HD operation manual Shotfield, Shotinterval, Series, Power Loss List, Wrng, Play, Tape