Specifications
General |
|
Power Source | : AC |
| (The included power cord is used for |
| 120 V, 60 Hz.) |
Power Consumption | : Approx. 20 watts |
Television System | : EIA standard 525 lines, 60 field NTSC- |
| type color system |
Color Signal | : Low frequency conversion, |
| phase shift recording |
Tape Format | : VHS 1/2” width |
| cassette tape |
Tape Speed and Recording | : See below (*1) |
Fast Forward/Rewind Time | : Approx. 120 seconds with |
Operating Temperature | : 41 °F to 104 °F (5 °C to 40 °C) |
Relative Humidity | : Max. 80 % |
Dimensions (Jog dial included) | : 16.7 (W) x 12.3 (D) x 3.7 (H) (in.) |
| 425 (W) x 313 (D) x 95 (H) (mm) |
Weight | : 9.7 lbs (4.4 kg) |
: 4 rotary heads | |
Luminance Signal | : Frequency modulation recording |
Audio Track | : 1 track |
Audio/Control | : 1 stationary head |
Erase | : 1 |
Motors | : 3 |
| system |
Battery Backup | : Lasts 31 days |
|
|
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.
(*1)
Tape Speed and Recording Time:
Audio
Input |
| : <Line In> 308 mV (rms), 47 k | , RCA plug | |
|
| <MIC In> 0.346 mV (rms), 600 | , mini jack | |
Output |
| : 388 mV (rms), 1 k , RCA plug |
| |
: Better than 43 dB |
| |||
Frequency Response | : 70 Hz - 4 kHz (6H mode) |
| ||
|
|
|
|
|
Video |
|
|
|
|
Input |
| : 1.0 V | , BNC plug |
|
Output |
| : 1.0 V | , BNC plug |
|
: Better than 42 dB |
| |||
Horizontal Resolution | : More than 400 lines (Super Resolution mode) | |||
|
| More than 240 lines (VHS mode) | ||
|
|
|
|
|
Connectors |
|
|
|
|
ALM Input | : Screw terminal for starting alarm recording |
| ||
RST Input | : Screw terminal for finishing alarm recording or for | |||
| adjusting |
|
| |
REC Input | : Screw terminal for starting/finishing recording or for | |||
| series recording |
|
| |
GND | : Screw terminal for ground |
|
| |
ALM Output | : Screw terminal for output while alarm recording is | |||
| under way |
|
| |
CLK Output | : Screw terminal to command camera switching | |||
MODE Output : Screw terminal for indication of VCR selected mode | ||||
CALL Output | : Screw terminal for external warning device or for | |||
| series recording |
|
| |
|
| |||
|
|
|
|
|
Speed | Recording | Recording Fields |
|
|
| |||||
| Time |
| Time | Interval | per Second | Video Signal | Audio Signal | Tape Drive | ||
Mode | Mode | (mm/s) | ||||||||
(s/field) | (fields/s) |
|
|
| ||||||
(hour:minute) | (hour:minute) |
|
|
|
| |||||
6H (EP) | 6:00 | 8H (EP) | 8:00 | 11.12 | 0.0167 | 60 | Continuous | Recordable | Continuous | |
L18H (EP) | 18:00 | L24H (EP) | 24:00 | 3.71 | 0.050 | 20 | Time Lapse | Recordable | Continuous (Slow) | |
L30H (EP) | 30:00 | L40H (EP) | 40:00 | 2.22 | 0.083 | 12 | Time Lapse | Recordable | Continuous (Slow) | |
48H (EP) | 54:00 | 64H (EP) | 72:00 | – | 0.150 | 6.7 | Time Lapse | Not recorded | Time Lapse | |
72H (EP) | 78:00 | 96H (EP) | 104:00 | – | 0.217 | 4.6 | Time Lapse | Not recorded | Time Lapse | |
96H (EP) | 102:00 | 128H (EP) | 136:00 | – | 0.284 | 3.5 | Time Lapse | Not recorded | Time Lapse | |
0H (EP) | – | 0H (EP) | – | – | – | – | Time Lapse | Not recorded | Time Lapse | |
|
|
|
|
|
|
|
|
|
| |
Note
If the VCR is not working correctly or showing an unusual indication on the fluorescent display, press RESET button at the rear panel with a pointed instrument. When pressed, Date/Present time/ALARM LIST/POWER LOSS LIST/Counter display/Recording and Playback mode will be set to the default setting and the VCR turns off.
To restart the VCR, press POWER button to turn on the VCR and then set the day and present time.
Reference page
