View Event Log
The event log saves status information and a message each time a change in the System is detected. Alarms and events are recorded in the log. However, status events (informational) are only displayed on the active alarms screen.
View log
Path: Main > View Log
New Events. The New Events option is a log of events that have occurred since the last time the log was checked.
Entire Log. The event log keeps a record of all alarms and events. Each event log entry consists of four screens of information. The initial screen consists of the following text:
•The name of the alarm
•Its index number in the log and the Module to which it applies
•The time and date the event occurred
•The name and description of the event
Use the arrow keys to scroll through the list of events.
To view more details about the event, press the ENTER key. This will allow access to three more screens (use the arrow keys to switch screens).
•Temperature and humidity
–Supply temperature and humidity
–Return temperature and humidity
•Pressures
–Discharge pressure
–Suction pressure
•Module status
–Condenser fluid valve position
–Output code (for use during service calls)
Clear Log. Erase all of the events in the log. When this option is selected, a confirmation screen displays and the service password must be entered to erase the log
NetworkAIR FM DX 60 Hz Operation, Maintenance, and Troubleshooting | 51 |
