Top-level status screens | American Power Conversion PD60L6FK1

PDU Display Interface

Top-level status screens

After system start-up, the display interface displays a brief start-up screen and then scrolls automatically and continuously through four screens of basic status information. Press the Up and Down arrow keys to interrupt the automatic scrolling if you wish to view a specific status screen.


Volts In		Volts Out
L1-2: 000		L1: 000
L2-3: 000		L2: 000
L3-1: 000		L3: 000


Total Output Loading
kW:	000	PF: 000
kVA:	000	%LD: 000
Freq:	00.0

Load Current

L1: 000 Neut:000

L2: 000

L3: 000

No Active Alarms

System Date/Time:

Jun-24 2003 07:58

Top-level menu screen

On any top-level status screen, press the ENTER key to open the top-level menu screen.


		Load-Meter	Alarms
		Volt-Meter	Panel
		Contacts	Config
		Breakers	Help

If the display interface is inactive for the time specified as the Time-outsetting, the interface reverts to the initial basic monitoring screens.

Note

For descriptions of the top-level menu choices, see the individual sections starting on page 16.

Navigating through screens

To open any screen, press the Up and Down arrow keys until the selector arrow ( rests next to your desired selection. Press the ENTER key to view the selected screen.


		Load-Meter	Alarms
		Volt-Meter	Panel
		Contacts	Config
		Breakers	Help

Contacts In: 02of04

Name: User Switch #2

Normal:Open

Status: Open



When configuring settings, press the Up and Down arrow keys until the selector arrow ( rests next to the setting you want to change, and press the ENTER key. If the setting is a list of choices, an input arrow ( will appear next to the setting. Press the Up and Down arrow keys until your desired change is listed. Press the ENTER key to select the setting.

Contacts In: 02of04

Name: User Switch #2

Normal:Open

Status: Open



14	60 kW InfraStruXure PDU — Operation and Configuration

Image 22

American Power Conversion PD60L6FK1, PD60G6FK1 Top-level status screens, Top-level menu screen, Navigating through screens

Contents

60kW InfraStruXure PDU Page Audience How to find updates to this manualAbout This Manual Companion manualsPage Contents Operation Specifications Product Information Cross-reference symbols used in this manual SafetySafety symbols used in this manual Overview Receiving/moving Installation/MaintenanceInput Voltage Circuit Breaker Sizing Total power off procedure Emergency Power Off EPO EMI InfraStruXure PDU OverviewFront view Front view interior Rear view of PDU with transformer interior PDU Rear view of PDU without transformer interior PDU monitoring unit User connection plate Multi-Branch Cordset Adapters SKU # Compatible APC 208V PDUs PDU Display Interface        Top-level menu screen Top-level status screensNavigating through screens Password-protected screens Power Factor Load-Meter Screen Volt-Meter Screen Input Contacts Contacts ScreenOverview Open or Closed Alarm Relay Map Relay output. For example, Alarm How to connect contacts to the PDU monitoring unit Breakers Screen Main Input Entire Log Alarms ScreenNew Logged Items Clear Log Loading Limits Global AlarmConfig Voltage Limits PDU Alarms Alarm Condition Explanation Branch Ckt Loading Panel ScreenBranch Ckt Limits Circuit breakers occupying positions 08, 10, and 12 on Panel ConfigurationTop right distribution panel Global Panel Config System/Network Config ScreenSystem Password Date/Time Output Config Electrical ConfigInput Config Manufacturer Data Factory Defaults Firmware Updates How to Apply Power to the System Operation For PDUs with and without a transformer How to Ensure Total Power Off For PDU with transformer Open turnPage InfraStruXure Manager Communication ConfigurationInfraStruXure PDU Management Options Network management interfaces Configuring the InfraStruXure Manager Connect the InfraStruXure PDU to the InfraStruXure Manager Configuration Overview Configuring the Network Management InterfaceConnect the InfraStruXure PDU to your network TCP/IP configuration methods Device IP Configuration Wizard Bootp & Dhcp configuration Option 43 = 01 04 31 41 50 43 where Use apc for the User Name and Password Local access to the control consoleRemote access to the control console Control console Use apc for both User Name and PasswordChoose Network from the Control Console menu Quick-Start manual for access information Web interface Snmp FTP and SCP KW InfraStruXure PDU-Operation and Configuration Important Safety Instructions Customizing and Updating the PDU PDU Orderable Part List Power CablesCircuit Breakers Customizing and Updating the PDU Add a power cable to the PDU How to Add Circuit Breakers and Power CablesAdd a circuit breaker on the PDU Customizing and Updating the PDU ATS 0 ATS 1 ATS Atsen How to connect contacts to the PDU monitoring unit How to Test the EPO Switch To test your EPO wiring and switches Safety warnings Customizing and Updating the PDU Upgrading the PDU monitor processor How to Download Firmware UpgradesFrom a local computer Xmodem Specifications 60kW InfraStruXure PDU Compliance InfraStruXure Standard Warranty Product Information Product Information APC Three-Phase Systems Life-Support Policy How to Obtain Service How to contact APC General changes Appendix Changes in This ManualChanges by page number Page Index 60kW InfraStruXure PDU-Operation and Configuration Page Page Page APC Worldwide Customer Support