Precis SD Control Panel Operation
Locking & Unlocking the Control Panel
The Precis SD Control Panel can be locked by pressing a sequence of Level Keys. Locking the panel prohibits access to the system and can prevent accidental switching. The password can be any combination of the first five Level Keys. The factory default password is the first five Level Keys, going from left to right. The password can be changed using XNConnect (see page 51).
While the control panel is locked, BCS commands still work; however, they cannot be used to unlock the panel. The panel remains locked if the power is cycled. If the password is lost while the system is locked, contact technical support (see page 32).
After you press the Lock Key, you have 10 seconds to enter the password before the control panel reverts to its previous mode (Locked or Switch mode). If you enter the wrong password, press the
Lock Key again and enter the correct password.
Places system in Lock Mode
Use Level Keys to enter password
Returns system to Switch Mode
FIG. 23 Lock Key and Level Key
To lock the control panel:
1.Press the Lock Key.
The Lock Key flashes for 10 seconds, and all the other lights on the control panel turn off. The panel is in Lock mode.
2.While the Lock Key is flashing, enter the password using the Level Keys.
The Lock Key stops flashing and remains illuminated. All the other lights on the panel are turned off.
The control panel is locked.
To unlock the control panel:
1.Press the Lock Key.
The Lock Key flashes for 10 seconds. The panel is in Lock mode.
2.While the Lock Key is flashing, enter the password using the Level Keys.
The Lock Key turns off. Any lights previously illuminated on the control panel turn back on. The control panel is unlocked and in Switch mode.
Precis SD Instruction Manual | 43 |
|
|
