Installation & Setup
4.Attach only the first two source and destination devices; see “Attaching Inputs & Outputs” on page 24.
Do not apply power to the devices until after the Precis SD has power (Step 5).
5.Apply power to the system according to the
Note: We recommend using surge protectors and/or AC line conditioners.
6.Execute a test switch to ensure the system is working properly; see “Executing a Test Switch” on page 29.
7.When the test switch works correctly, attach the remaining source and destination devices.
Additional Installation Options
Additional installation tasks may include the following:
Creating custom channel names – See page 50 in “Appendix A – Managing Configuration Files.”
Setting a control panel password – See page 51 in “Appendix A – Managing Configuration Files.”
Creating / Defining local presets for macros – See page 52 in “Appendix A – Managing Configuration Files.”
Creating global presets – See the BCS Protocol Instruction Manual on the AMX AutoPatch CD or at www.amx.com.
Precis SD Instruction Manual | 19 |
|
|
