Appendix B – Programmer’s Interface for System Diagnostics
Splash Screen Examples
Following are four examples of splash screen information that could be displayed when different verbosity/component settings are specified. Depending on the amount of detail provided, you may need to scroll to see the entire display. Use the first example to check the host software (IOS) version and the hardware driver (appcode) version.
~scrv1i1!
[1:Enclosure] AutoPatch
[ap system id] 0x0
[nvram status] valid.. user preferences restored [nvram magic] 0xdedafaba
FIG. 26 Display for v1i1 (verbosity 1, component 1)
~scrv3i3! |
|
|
|
[3:Communication | Interfaces] count = 3 |
| |
[interface 1] | detected |
|
|
[type] BCS | mode RS232 port, | 9600 | (8/1/N/E/NS) |
[interface 2] | detected |
|
|
[type] MCF5272 FEC Ethernet | Controller | ||
[interface 3] | detected |
|
|
[type] Neuron bridge v1.0.3 |
|
| |
FIG. 27 Display for v3i3 (verbosity 3, component3)
Precis SD Instruction Manual | 57 |
|
|
