Andrew 3.7-Meter Earth Station Antenna manual Step Step, Installation Procedures

Step 10

Step 11

The next step is to install the elevation strut assembly. Begin by bolting the elevation strut tube assembly (P/N 205872) to the ground mount assembly as shown in Figure 3-19.

Figure 3-19: Elevation Strut Pick Up Assembly (Top View)

Bolt the elevation bracket-support plates (P/N 205873) to the elevation strut tube assem- bly using 5/8 inch hardware (hex bolt, flatwasher and nut)as shown in Figure 3-20.

Figure 3-20: Bracket-Support Plates (Top View)

30 Installation Procedures