Andrew 3.7-Meter Earth Station Antenna Step Step, Installation Procedures, 28a:Elevation Jack

Step 8

Step 9

Bolt the elevation pivot assembly brackets (P/N 208370 - left and P/N 208371 - right) to the inside of the ground mount assembly as shown in Figure 3-27.

Figure 3-27: Elevation Pivot Bracket Assembly

Bolt the jack to the elevation pivot assembly using 5/8 inch hardware (hex bolts, flat- washers and nuts) as shown in Figures 3-28a and 3-28b.

Figure 3-28a: Elevation Jack

36 Installation Procedures