Enclosure
(Pedestal Mount
Only)
Step 1
The enclosure (P/N 202934A) assembly attaches to the rear of the reflector. The enclo- sure provides weather protection for RF equipment and can accommodate up to a 4- port combiner network. An example of the assembled enclosure is presented in Figure
Figure 3-38a: Enclosure - Final Assembly
Figure 3-38b: Enclosure - Final Assembly
Before assembling the enclosure, verify that the appropriate parts are present. The fol- lowing steps provide the procedure for the enclosure assembly.
Remove the rear covers and corresponding side panels from the enclosure assembly.
52 | Installation Procedures |
