Step 10 Step 11
Step 12
Step 13
Step 14
Figure 3-28b: Elevation Jack
Loosen the clamp on the jack boot.
Unscrew the jack by using a spud wrench until the jack connects to the back of the enclosure as shown in Figure 3-28c.
Figure 3-28c: Elevation Jack Extension
Tighten the hardware using the A-325 tensioning procedure.
Lubricate the jackscrews using the maintenance procedures.
Pull the protective boot over the jackscrew, and clamp it at the end as was performed with the azimuth jackscrew.
37 | Installation Procedures |
