Andrew 3.7-Meter Earth Station Antenna manual Enclosure Bracket Alignment

Step 5

Step 6

Align the enclosure bracket to the ground mount assembly. The left bolt should be inserted to hold reflector in place using 3/4” A-325 hardware (hex bolt, flatwasher and nuts as shown in Figure 3-47 and Figure 3-48.

Figure 3-47: Enclosure Bracket

Have the two people on the ground rotate the reflector to connect with the right bolt of the enclosure bracket against the ground mount angle bracket. Facing the reflector, the right bolt should be inserted to hold the reflector in place using the appropriate hard- ware.

Figure 3-48: Enclosure Bracket Alignment

59 Installation Procedures