Subreflector
Step 1
Once the reflector has been assembled to the mount, the subreflector must be installed. Figure
Figure 3-51: Installed Subreflector
The following steps provide the procedure for assembling the subreflector.
Loosely preassemble the subreflector strut weldment (P/N 202775) using the supplied strut angles (P/N 202776) and the 3/8 inch by 2-1/4 inch bolts, lock washers, and nuts as shown Figures 3-52a and 3-52b.
Figure 3-52a: Subreflector Strut Assembly
63 | Installation Procedures |
