Safety

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

This guide contains important instructions for SYMF1200KH that should be followed when handling the UPS, External Bypass Static Switch, Battery Enclosures, and Batteries.

Symbols used in this guide

Warning: Indicates an electrical hazard, which, if not avoided, could result in injury or death.

Caution: Indicates a hazard, which, if not avoided, could result in injury or death.

Note: Indicates important information.

Indicates that more information is available on the subject.

Main Protective Earthing Terminal symbol.

Ground symbol.

Installation safety

Press the optional EPO (Emergency Power Off) button to switch off all AC and DC power EPO supply to connected equipment in the room and to cut off the load supply. The EPO is

typically located on a wall in the room in which the UPS is installed. See “Communication cable overview” section for information on how to wire the UPS to the EPO.

Warning: Before you start the installation, verify that all AC and DC power source breakers are in the open position.

Warning: Only personnel trained in the construction and operation of the equipment, and the electrical and mechanical hazards involved, must install or remove system components.

Symmetra MW II 1200 kW 3 x 400/230 V Installation - 990-1979E-001

1

Page 5
Image 5
APC MW II manual Symbols used in this guide, Installation safety