The microphones don’t need to be super high quality for voice recordings, but the higher the quality input, the better the recording (up to a point). Start out with a low-cost mike. (Try Radio Shack’s Windscreen Dynamic Omni--RS Cat. No. 33-2001.)

For mono input, a mike with a 1/8’ mini stereo plug does not need a Y-adapter.

For stereo input, either plug two mono mikes into a left and right mono adapter (two 1/8” mono plugs to 1/8” stereo jack” adapter--RS Cat. No. 274-375--see below) or try a dual head microphone (RS Cat. No. 33-1065).

ToMono Microphones

Left and RightTo Sonic Blaster "IN”

(Ch1 & Ch2)

RS Cat. No. 274- 375

Two 1/8” Mono Plugs to

1/8” Stereo Jack

If your mike cable ends in a 1/4” plug, you can use the 1/4” phone plug to 1/8” lack (RS Cat. No. 274-047) for mono input.

To 1/4” Mono

 

Microphone Jack

To Sonic Blaster “IN”

RS Cat. No. 274- 047

1/4” Mono Plug to

1/8” Jack

52 Sonic Blaster