Saving Large Files to Multiple Disks
If you have a file that is larger than a single floppy disk, you can break it up into two or more files and save it to separate disks. You can then load it back into the program using the Append option under the File menu.
To break up a file into several files, follow these instructions:
1)Hold down the 
key while clicking the mouse within the sound graph of the file.
This will select a portion of the file from the beginning to the point where you click the arrow.
2) Check the Select Region to see how much is selected.
3) Continue to hold down the 
key while dragging more to the left or right within the sound graph until you have selected a region the size you want to save. Release the mouse button and 
key.
4) When you have the right size, Cut it (
This moves the selected segment to the clipboard.
Don’t use the Copy command to move the segment to the clipboard. You need to remove the segment from the sound graph window.
5)Open a New file 
-N).
If you’re segmenting a stereo file, your Record Channel should be set to Stereo Record before opening a new file. Otherwise, the two channels will be combined into one mono file.
If you’re segmenting a mono file, set the Record Channel to Channel 1 or Channel 2 before opening the new file. If you set the Record Channel to Stereo Record, the mono file will be pasted into both channels (not true stereo; just split mono) and the size of the segment will be doubled.
6)Select All 
-A).
7)Paste 
-V)
54 SonIc Blaster