MANUAL V2.0
5 & 7 MAIN SETTINGS > P. 59
8.12 “seCurITy” seTTIngs“seCurITy” seTTIngsseCurITy” seTTIngs
Here you can dene a security code that will be asked every time the device is turned
on. You can enable/disable the code and change it.
8.13 ““CusTOMer assIsTanCe” seTTIngs
Here you access the online registration, view the PDF user manual or access the “Repair
and Formatting Tools”:
“Repair and Formatting Tools”
use this button to access the “Repair and Formatting Tools” settings screen. This
screen allows you to do the following actions:
“Clear temporary system les and cache” (does not erase any data)
“Reset Settings” (resets all user settings)
“Format Hard Drive” (erase all data, media les, and licenses)
“Full Reinitialization” (erase all data, media les, licenses and settings)
In the event that your ARCHOS freezes or does not respond anymore, try to
reset it (see: Troubleshooting).
If this does not work or if you cannot access the Repair and Formatting Tools,
you can try a system recovery (see: Troubleshooting).
8.14 “fIrMware and Plug-Ins” seTTIngs
“Firmware Ver.”
displays the current version of the rmware and Digital Rights Management
(DRM) system.
-
-
-
-
-
-