Single Mobile Receiver/Controller
Audio/Video Connections
• To connect the receiver/controller to the TV’s
video input, you can choose either of the
following options:
Option 1 - RCA-type jack
Option 2 - S-Video jack
• To connect the receiver/controller to the TV’s
audio input, you can choose either of the
following options:
Option 1 - RCA-type jacks
Option 2 - Digital audio jack
• Standard audio/video cables with RCA-type
connectors are included with the receiver/
controller.
• If the TV has only a coaxial input, you will need
to use an RF modulator to convert the RCA-type
input to a coaxial output. (use Radio Shack model
15-2526 or equivalent)
Power
• The receiver/controller requires a 10-16 volts DC
(VDC) power input supporting 60 watts.
• If vehicle/vessel power fluctuates or is noisy,
KVH recommends that you use an AC/DC
power supply to connect power to the
receiver/controller.
RF Converter
• The RF converter should be placed at least 3 feet
away from the receiver/controller. If it is too close
to the receiver/controller, the remote control
might not operate properly.
• Avoid placing the RF converter behind a metal
surface or in an area surrounded by metal.
54-0376 A.5
System Wiring Diagrams