54-0376
3.10
DIRECTV Mobile Receiver/Controller User’s Guide
2. Turn on the receiver you want to control with the
remote.
3. Press the MENU button to access the main menu.
4. From the main menu, highlight the System Setup
tab and press SELECT.
5. Highlight the Remote tab to access Remote
Control Settings.
6. Highlight the Remote ID button.
7. Press and hold the SAT button.
3-3 Controlling Multiple Receivers
If you are using multiple KVH mobile receivers, you
can change a remote control ID to avoid interference
or “cross talk” between the two remotes. The remote
control ID can be a number from “001” to “008.”
For example, if you have two receivers, you can set
one receiver and remote to 001 and the other
receiver/remote to 002. That way, the 002 remote
cannot operate the 001 receiver, and the 001 remote
cannot operate the 002 receiver.
To set a remote control and receiver to use a different
remote ID, follow the steps below.
1. First turn off the receiver(s)
you do not want to control
with the remote you are
programming.
Antenna
Remote Control Code Entry
For details on ordering an additional mobile
receiver, please call or visit your local KVH
authorized dealer/installer.