AT&T 8410 manual Message

To leave a message without ringing an extension

1If you are using an 8410 with a display, press [ Menu ] and then press the softkey below LWC

(while on-hook or off-hook)

If your 8410 does not have a display or if LWC is not available on your display, press [ LWC ]

(while on-hook or off-hook)

or Dial Leave Word Calling access code (while on-hook or off-hook)

[dial tone]

2 Dial extension

[confirmation tone]

●Message light goes on at called voice terminal (if so equipped)

3 Hang up or press [ Drop ]

To cancel a Leave Word Calling message

Note: You cannot cancel a message left for an AUDIX subscriber.

1If you are using an 8410 with a display, press [ Menu ] and then press the softkey below CnLWC

(while on-hook or off-hook)

If your 8410 does not have a display or if CnLWC is not available on your display, press [ Cancel LWC ] (while on-hook or off-hook)

or Dial Leave Word Calling cancel code

(while on-hook or off-hook)	[dial tone]
2 Dial extension	[confirmation tone]

Note: If reorder tone is heard, message is not canceled; try again.

Message ✔

To retrieve a message

when your Message light

is on

1If your set has a display, see the Message Retrieval procedures under the Display Features Procedures heading. Otherwise, see your system manager for instructions regarding your local message retrieval procedures.

28