AT&T 8410 manual Send All Calls

To adjust ringer volume

if necessary (speaker is

not active)

1To raise the volume, press the right half of the Volume control button labeled [ ∧ ] ;

to lower the volume, press the left half of the Volume control button labeled [ ∨ ]

● If you have a display, it shows

RINGER L>>>>> H

(There are eight possible volume settings. On the display, one arrow is the lowest setting, and eight arrows is the highest setting)

One full ring cycle will sound to demonstrate the new volume

Send All Calls

You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, SAC, appears on the second line of one of the feature option screens.

To send all calls (except priority calls) immediately to coverage (If your system manager has provided a coverage path for your extension)

1If you are using an 8410 with a display, press [ Menu ] and then press the softkey below SAC

(while on-hook)

If your 8410 does not have a display or if SAC is not available on your display, press [ Send Calls ] (while on-hook)

or Dial Send All Calls access code	[confirmation tone]
(while on-hook)

Note: You may hear a ring-ping tone from your voice terminal as each call is forwarded.

33