AT&T 8410 manual Intercom Automatic/Dial

[ringback tone]

[dial tone]

To return a held call 1 Press [ xxxxx ] of held call

●You are connected to held call

Note: If you are active on a call and you press the [ xxxxx ] of the held call, the active call will be

dropped.

Intercom (Automatic/Dial)

You can access these feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, IAuto (for the Automatic Intercom feature), or IDial (for the Dial Intercom feature) appears on the second line of one of the feature option screens.

To make a call to your	1 If you are using an 8410 with a display, press [ Menu ]
predetermined Automatic	and then press the softkey below IAuto
Intercom partner	(while off-hook)
	If your 8410 does not have a display or if IAuto is
	not available on your display, press [ IcomAuto xxx ]
	(while off-hook)
	[ringback tone]

●Special intercom ring is sent

Note: If call is unanswered, press [ Go to Cvr ] while call is ringing if you want to redirect it to coverage.

1 If you are using an 8410 with a display, press [ Menu ]

To dial a call to a

and then press the softkey below IDial

member of your Dial

(while off-hook)

Intercom group

If your 8410 does not have a display or if IDial is not available on your display, press [ IncomDial xxx ] (while off-hook)

●Green light goes on steadily

2Dial group member’s 1- or 2-digit code

●Special intercom ring is sent

Note: If call is unanswered, press [ Go to Cvr ] while call is ringing if you want to redirect it to coverage.

26