To retrieve a parked call | 1 Pick up handset or press [ Speaker ] | [dial tone] |
from any extension
2Dial Call Park Answer Back code
[dial tone]
3Dial extension where call is parked
[confirmation tone]
●If returning to call parked at your voice terminal, dial your own extension
Note: If you receive intercept tone, the parked call has been disconnected or retrieved by someone else.
Call Pickup
You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, CPkUp, appears on the second line of one of the feature option screens.
To answer a call placed to a member of your pickup group when your voice terminal is idle
1If you are using an 8410 with a display, press [ Menu ] and then press the softkey below CPkUp
If your 8410 does not have a display or if CPkUp is not available on your display, press [ CallPickup ]
or Dial Call Pickup access code
●Called voice terminal stops ringing
●You are connected to ringing call
Conference | ✔ |
|
|
|
|
To add another party to a
call (for a total of up to
6 parties)
1 Press [ Conf ] | [dial tone] |
●Present call is put on hold, and you are given a new call appearance; all other parties remain connected to each other
2Dial number of new party and wait for answer
Note: You can privately discuss the call with the new party at this time; if no answer or busy, press fluttering [ xxxxx ] to return to held call.
3Press [ Conf ] again
●
●
All parties now connected
Repeat Steps 1 through 3 for additional conference connections
23
