5 Dial list item (1, 2, 3...)

[dial tone]

6Dial number you want to store (up to 24 digits)

Note: If your 8410 has a display, you may be able to use the softkeys to add special features such as Pause, Mark, or Wait into the telephone numbers programmed on the AD button.

If you are programming an outside number, be sure to include a trunk code, if applicable.

7 Press [

#

]

[confirmation tone]

Number is stored

Repeat Steps 5 through 7 if you want to program additional items on the same list; press [ Drop ] and begin again at Step 1 if you want to program items on another list

8Hang up or press [ Drop ] to end programming

Note: Record your personal list items on the Abbreviated Dialing list in the back of this guide; group, system, and enhanced lists can be obtained from your system manager.

To place a call using an

AD list button or code

1Press [ Pers List ] or [ Grp List ] or [ Sys List ] or Dial appropriate AD List code:

List 1

List 2

 

[dial tone]

List 3

Note: An [ Enhcd List ] may also be available; see your system manager.

2Dial desired list item (1, 2, 3...)

Call is automatically dialed

[ringback tone]

18

Page 23
Image 23
AT&T 8410 manual Dial list item 1, 2 Dial tone