Priority Ring Numbers | AT&T 9370 instruction

9370_to make pdf_1ATT 6/12/00 2:07 PM Page 29

TELEPHONE MEMORY/DIRECTORY

Priority Ring Numbers

Numbers stored in memory can be labeled so that when a call is received from that number, the handset alerts you with a special ring. The special ring begins after the first normal ring.

1While viewing numbers in memory, use <or >to scroll to the desired location.

2Press *to activate Priority Ring for the displayed number (the screen displays !). To deactivate, press #.

3Press Utwice.

Dial a Memory Number from the Handset

1Press P.

2Use the softkey to select MEM.

3Enter a memory location from 01–10.

4Select DONE.

NOTE: You can also view numbers in memory before dialing. See page 27.

Dial a Memory Number from the Base

1Press K, and wait for a dial tone.

2Press e.

3Use the base keypad to enter a memory location from 01–10.

29

Image 31

AT&T 9370 user manual Priority Ring Numbers, Dial a Memory Number from the Handset, Dial a Memory Number from the Base

Contents

Revised 6/12/00 Advanced American Telephones. All rights reserved Contents Page About Caller ID with Call Waiting Before YOU BeginAbout Home and Local Area Codes Before You Install Installation Install the handset battery Table/Desk and Wall Installation Connect the telephone line cord Message Window Display for Feature Setup Feature SetupSoftkeys Handset Ringer Telephone Feature SetupDial Mode Handset Ringer Off / Battery Save Call List Options Caller ID Feature SetupProgram Home and Local Area Codes Caller ID with Call Waiting Answering System Feature Setup Ring Select / Toll Saver Select Your AnnouncementAudible Message Alert Priority Call Signal Change Remote Access CodeChange Priority Calling Code Record Your Announcement from the Base Review Feature Settings Set the Clock Delete an Announcement Talking Caller ID Feature Setup Caller Specific Outgoing Announcement Feature Setup Announcements Outgoing Local Review ADD Enter Number Done Menu Call ID DIR Directory MEM ANS SYS Delete Done Telephone Operation Temporary Tone RedialMute Intercom HoldRecord a Phone Conversation Headset Jack Changing Channels AT the Base Speaker Base Ringer Volume Handset Locator Page/Intercom Store a Number in Memory Telephone MEMORY/DIRECTORY Store a Name with a Memory Number Store a Pause in a Memory NumberReplace a Stored Number View Memory Numbers Store a Number and Name from Call History Edit Memory Numbers Delete Memory Numbers Dial a Memory Number from the Handset Priority Ring NumbersDial a Memory Number from the Base Announcement Play/Silent Audible IndicatorsAnswering System Operation About Mailboxes Record a Memo Answering CallsCall Screening/Intercept Announcement Bypass Function Button Listen To, Save & Delete Messages CL ↔ AO Message Window Display From a Touch Tone Phone Call ScreeningConnect with the Answering System From the Cordless Handset Function Command Remote Access Commands End remote access call Voice Help Menu Audible Signals Incoming Call History Call WaitingMemory Match Review Call History Caller ID OperationDisplay Dial Delete a Specific Call Record Delete Call Records from Call History Delete All Call Records Caller ID Display Messages Operating Range Charge the Handset Battery Pack Battery LifeBatteries Batteries Replace the Handset Battery Pack To re-initialize the handset and base Case of DifficultyIf the phone does not work at all, check these items first If you have no dial tone If the phone does not ring when you receive a call If you hear noise or interference when using the phoneIf the caller’s name or phone number is not displayed If messages are incomplete If speakerphone conversation sounds distortedIf you have difficulty hearing messages If your outgoing announcement isn’t clear If CL appears in the Message Window Index Index Answering System Remote Commands Remote Command Press