AT&T E5654B user manual Wall mounting, Install wall mount bracket onto the set

Getting Started

Wall mounting

The base can be installed on any standard wall phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, computer rout- ers, television sets or microwave ovens.Avoid excessive heat, cold, dust or moisture.

1)Connect telephone line cord and power adapter to telephone jacks and wall jacks, as shown on page 6.

2) Install wall mount bracket onto the set. b b

(a) First put the two front wall mount bracket tabs into the front notches on the bottom of the telephone base.

(b)Squeeze the rear tabs of the wall mount bracket as you insert them into the rear notches on the bottom of the

telephone base.

NOTE: To disassemble the wall
mount bracket, squeeze the rear tabs while
lifting up the wall mount bracket back and
away from the telephone base.	a	a

Plug power adapter into electrical outlet.

3) Position the wall-mount bracket over the wall-outlet mounting pegs, and press and slide the wall-mount bracket down firmly so it is held securely on the outlet mounting pegs.

Plug telephone line cord into telephone cord wall jack.