1. Dial your telephone number from any
2. When system answers, enter two digit remote access code (19 unless you have changed it).
3. Enter remote commands (see list at right).
4. Hang up to end call and save all undeleted messages.
NOTE: If you pause for more than 10 seconds during remote access, you will hear a help menu listing all features & commands. If you issue no command for another 20 seconds, the call will end automatically.
Answering System Operation
Remote access
A two digit security code is required to access your answering system from any
Play all messages | Press to hear all messages. |
1 |
|
Play new messages | Press to hear new messages. |
2 |
|
Delete the message | Press during playback to delete current |
3 | message. Press 3 twice to delete all old |
33 | message. |
|
|
Repeat or go back | Press during the caller’s message to |
4 | repeat the message. Press during the |
| beginning of the day and time announce- |
| ment to go back to the previous caller’s |
| message. |
|
|
Stop | Press to stop any operation (stop play- |
5 | back, stop recording). |
|
|
Skip to next message | Press to skip current message and |
6 | advance to next message. |
|
|
Review announcement | Press to review current outgoing |
#7 | announcement. |
|
|
Record announcement | Press * 7, wait for beep, then begin |
*7to begin recording | speaking. Press 5 to stop recording and |
5to stop recording | hear playback of new announcement. |
| |
|
|
Record memo | Press 8, wait for beep, then begin speak- |
8to begin recording | ing. Press 5 to stop recording. |
5to stop recording |
|
|
|
Review remote access code | Press # 9 to review remote access code. |
#9 |
|
|
|
Change remote access code | Press * 9 to change remote access code, |
*9 | then enter desired remote access code |
| from |
39