>HANDSET LOCATOR DISPLAY BASE ID
>DISPLAY BASE ID DIAL TYPE
DIAL TYPE
TONE
Telephone Operation
Base settings
Handset Locator
This feature is used as an aid to locate the handset(s). It can only be activated from the base. Press SELECT/ MENU and then press the ^or Vkey until the HANDSET LOCATOR option is shown. Press SELECT/MENU.The screen on the base will show PAGING ALL HANDSETS and start the paging tone at the handset(s) for 60 seconds.
To stop the paging tone, press PHONE, SPEAKER or press any dial pad key on the handset or press CLEAR on the base.
NOTE: The handset ringer volume also determines the level of the pag- ing tone. If the handset ringer volume level is set to off (0), that handset will be silenced for all calls and paging (see page 17).
Display Base ID
Press SELECT/MENU and then press the ^or Vkey until the DISPLAY BASE ID option is shown. Press SELECT/MENU to show the base ID number.This num- ber can be used when adding, replacing, or
Dial Type
At this menu you can choose Tone or Pulse dialing.The factory default setting is TONE. Change this to PULSE only if you do not have
Use the ^Vbuttons to select TONE or PULSE, then press SELECT/MENU to save your preference.
NOTE: This sets the dial type for both the handset(s) and the base.
21