Flash
Flash 
Volume
Off
Volume
Telephone Operation
Options while on calls - Handset and Base
Volume control
Press the top ( + ) or the bottom ( - ) of the VOLUME button on the handset or press ^or Vof the VOLUME button on the base to adjust listening volume. Each button press raises or lowers volume by one level.
When you change the volume level, the new setting is saved.The new volume level will be applied each time you use the handset, speakerphone or headset.
Call waiting
If you subscribe to a call waiting service with your local telephone service provider, you will hear a beep if some- one calls while you are already on a call. Press FLASH to put your current call on hold and take the new call.You can press FLASH at any time to switch back and forth between calls.
NOTE: On the handset, if you have accessed the directory while on a call, you will need to press CLEAR then FLASH to put the call on hold and take the new call.
3-way conference calls
While a call is in progress, a person at one other hand- set can press PHONE or SPEAKER to join the call.A person at the base can press SPEAKERPHONE to join the call.
A person at either handset can press OFF, or place the handset in the base to drop out of the conference call.A person at the base can press SPEAKERPHONE to drop out of the conference call.A conference call will not be terminated until all the handsets and the base hang up.
Only two handsets or one handset and the base can be connected to an outside call at the same time.
12
