Ativa AWGR54 user manual Set up the Hardware

Connecting and Configuring your Router

Step 2 Set up the Hardware

The Wizard will walk you through connecting your Router to your computer and modem. Follow the steps on the screen using the pictures as a guide.

2.1This step instructs you to locate the cable connected between your modem and the networking port on your computer. Unplug this cable from the computer and plug it into the modem port on the Router. Click “Next” to continue.

2.2This step instructs you to locate the BLUE cable that is included with your Router. Plug one end of this cable into ANY one of the wired-computer ports on your Router. Plug the other end of the cable into the networking port on your computer. Click “Next”

to continue.

2.3This step instructs you to locate the power supply that is included with your Router. Plug the power supply’s small connector into the power port on the Router. Plug the power supply into an empty power outlet. Click “Next” to continue.

1

2

3

4

5

6

7

8

9

10

section

17