6
4929B–AUTO–01/07
ATA6264 [Preliminary]

3. Absolute Maximum Ratings

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
All voltages are referenced to an ideal ground level of an ECU connected to the GNDA, GNDB and GNDD pins.
Parameters Remark Minimum Maximum Unit
Voltage at pins, connected directly or
indirectly to the car battery
(K30, K15, USP)
Any combination of one or more pins
applied with any voltage between the
limits
K30 and K15 connected via diode to VBatt.
USP connected via minimum 5 kΩ to VBatt
(maximum reverse current 5mA).
–0.3 +45 V
Voltage at pins, connected directly or
indirectly to the car battery (K1, K2)
Any combination of one or more pins
applied with any voltage between the
limits
–25 +45 V
Voltage at pins, connected directly or
indirectly to the car battery (IASG1,
IASG2, IASG3,IASG4, IASG5)
Any combination of one or more pins
applied with any voltage between the
limits
Voltage
necessary to
drive –40mA
stored in 20µH
45 V
Voltage at ECU internal pins (FBEVZ,
EVZ, VSAT)
Any combination of one or more pins
applied with any voltage between the
limits
–0.3 +45 V
Maximum rate of change at pin VSAT 1V/µs
Voltage at ECU internal pins (SVSAT,
SVCORE)
Any combination of one or more pins
applied with any voltage between the
limits
–1 +45 V
Voltage at ECU internal pins (CP,
CP-OUT)
Any combination of one or more pins
applied with any voltage between the
limits
–0.3 +56 V
Voltage at ECU internal pins (GEVZ,
OCEVZ)
Any combination of one or more pins
applied with any voltage between the
limits
–0.3 +10 V
Voltage at ECU internal pins (COMEVZO,
COMSATO, COMSATI, VPERI, SVPERI,
VCORE, COMCOI, COMCOO, IREF, UZP,
ISENS, RXD1, TXD1, RXD2, TXD2,
RESQ, RESQ2, MISO, MOSI, SSQ,
SCLK, VINT)
These voltages can be applied in any
combination with any voltage between the
limits
–0.3 +7 V
Current at logic pins Connected to voltages outside of
maximum voltage ratings via resistor –3 +3 mA
ESD classification at pins connected to
devices outside the ECU (K30, K15)
Human body model (HBM) HBM
AEC Q100-002
±4000 V