Adding the Voice Tag to a New Phonebook Entry
1.When the phonebook menu appears, select “New Entry” then
press 
. Enter a phone number and name. (See Basic Sav- ing on page 41.)
2.Press the softkey under Save then press 
.
Note: 1. Register names in your normal voice tone and in a quiet environ- ment.
2.For better recognition, similar sounding names should not be reg- istered.
3.The same person’s voice that was used to record the names must be used for dialing, otherwise the VAD feature may not work prop- erly.
Replaying Registered Voices
1.Press 
. Select “Voice Dial” then press 
.
2.The Voice Dial list is displayed.
3.Select the entry then press 
.
4.The registered voice plays.
Dialing with Your Voice
1.Press and hold VAD .
2.After you hear the voice prompt “Name please”, say the name you want to call into the microphone.
3.When the phone recognizes your voice, you will hear the prompt “Calling ....” .
4.The number will be automatically dialed.
Tip: To make a voice activated call using the speakerphone mode, press
and hold 
.
Note: 1. If you hear “Did you say ...?” , answer “Yes” or “No”.
2.If using this feature through a car kit option, speak slightly louder for better recognition.
52Chapter 3
