3Installing a New G700 with an S8300
Administer Communication Manager
158 Installation and Upgrades for G700 and S8300
December 2003
IP Network Region Screen, Page 3
4Type the number for the type of codec set (1–7) that the S8500 or S8700 will use to interconnect
the G700 and the C-LAN board(s) in the row corresponding to the region of the C-LAN. In this
example, the C-LAN is in region 9 and codec-set type 3 is to be used for the interconnection
between region 1 and region 9. (In this example, codec type 1 is used for communication within
region 1)
The SAT command, list ip-codec-set, lists the types of codecs available on this server.
For more detail about the Inter Network Region Connection Management form, see
‘‘Administration for Network Connectivity for Avaya Communication Manager, 555-233-504.’’
5Press F3 (ENTER) when complete.
Assign LSPs to the Network Regions
If the primary controller has LSPs, you can assign the LSPs to network regions. In the event of a network
failure, IP telephones assigned to a network region will register with the LSPs assigned to that region.
This procedure assigns up to six LSPs to a network region.
Assign LSPs to a network region
1On the IP Network Region screen, go to page 3.
IP Network Region Screen, page 3
display ip-network-region 1 Page 3 of 19
Inter Network Region Connection Management
src dst
rgn rgn codec-set direct-WAN WAN-BW-limints Intervening-regions
11 1
12
13
14
15
16
17
18
19 3
110
111
112
113
114
115
change ip-network-region 1 Page 2 of 19
IP Network Region
LSP NAMES IN PRIORITY ORDER
1 node-10-LSP______
2 ________________
3 ________________
4 ________________
5 ________________
6 ________________