Axis Communications 2100 manual Refining the Dial-up Networking Properties

30 Using Your Camera with a Modem AXIS 2100 User’s Guide

Refining the Dial-up Networking Properties...

Having created the Dial-up connection for your AXIS 2100, follow the steps below to refine the connection properties:

❶From the Dial-up Networking dialog, right click the dedicated Dial-up connection previously created for you camera (AxisCamera was the connection created used in this and previous examples). Select Properties.

❷Click the Server Types tab. From the drop-down dialog, select PPP as the Type of Dial-Up Server.

❸In the Advanced options field, check Enable software compression. All other check boxes should remain unchecked.

❹In the Allowed network protocols field, check the TCP/IP check box. NetBEUI and IPX/SPX check boxes should remain unchecked.

❺Click TCP/IP settings and then check the Server assigned IP address, and Server assigned name server

addresses radio buttons.

❻Check the Use IP header compression and Use default gateway on a remote network check boxes. Click OK.

7Click the Scripting tab and ensure that the Start terminal screen minimized check box is checked. Click OK to exit Dial-Up Networking Properties.